Hi all,
I've been trying to configure EAPFAST on Autonomous AP 1242 with the above firmware using local radius. Here are the config:
aaa new
aaa group server radius rad_eap
server x.x.x.x auth 1812 acct 1813
aaa authentication login eap_methods group rad_eap
dot11 ssid EAPFAST
vlan 10
authentication open eap eap_methods
authentication key wpa
int d0
encryption vlan 10 mode cipher aes
ssid EAPFAST
no shut
int d0.10
en do 10
bridge 10
int f0.10
en do 10
bridge 10
int f0.100
en do 100 na
bridge 1
int bvi
ip add x.x.x.x 255.255.255.0
radius-server local
eapfast authority info XYZ
eapfast server-key primary auto
nas x.x.x.x key ####
group FAST
eapfast pac expiry 2 grace 2
username eapfast password eapfast group FAST
radius-server host x.x.x.x auth 1812 acct 1813 key ####
For all my tests, I can get the 7921 phone to work. But using CSSC or even win7 supplicant, I can never get the authentication to go through. I think the eap authentication is stuck at pac provisioning. If i am to manual provision the pac using tftp, it will work. Any clue?
Alvin
