- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-23-2018 07:43 AM - edited 07-05-2021 08:39 AM
Hi Guys
I've got an cisco 1852 AP. Its model is AIR-AP1852ISK9C-RF. The Cisco Mobility Express software has already installed on that AP. I will use this AP for a wireless site survey. In order to do that, I should configure it as a standalone AP. If it is highly appreciated if you can explain me how to configure standalone settings for this AP by using Mobility Express. Many thanks.
Cheers
Oshaka
Solved! Go to Solution.
- Labels:
-
Mobility Express
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-23-2018 11:45 AM
I would go with 8.5.120.0 , if it comes with earlier releases.
Follow below URL for how to configure it for sitesurvey
HTH
Rasika
*** Pls rate all useful responses ***
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-23-2018 11:45 AM
I would go with 8.5.120.0 , if it comes with earlier releases.
Follow below URL for how to configure it for sitesurvey
HTH
Rasika
*** Pls rate all useful responses ***
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-23-2018 08:26 PM
Thank you very much for your support.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-23-2018 08:32 PM
Not a problem.
If you able to configure it using provided link, you can mark it as accepted solution.
Otherwise pls let us know any queries.
HTH
Rasika
