en
#conf t
config)#ip default-gateway x.y.z.w
config)#int BVI1
fig-if)#ip address x.y.z.w 255.0.0.0
fig-if)#no shut
fig-if)#exit
config)#int dot11Radio0
fig-if)#ssid test
fig-if)#no ssid tsunami
fig-if)#exit
config)#exit
#copy run start
Then you can connect to it from the wireless side or wired side using a Web Browser and the x.y.z.w IP config for BVI and configure anything else you may want in there.
Cheers
