11-22-2004 12:08 AM - edited 07-04-2021 10:10 AM
After installing the new firmware release in Cisco Aironet 1200 Access Point version 12.3(2)JA , we came up with a problem that occurs in broadcast traffic.
The Access point doesnt forward the broadcast packets transmitted by the station. This problem didnt exist in previous version of firmware (12.2-15-JA)
Any suggestion?
12-14-2004 12:59 PM
There has been much reference to the DHCP broadcast in regards to this bug. I would like to clarification if this is DHCP specific or all broadcast packets in general.
TY
12-16-2004 03:11 AM
Hi psion.
We reproduce this problem with STATIC ip. It isn't only a DCHCP problem but in all broadcast packets.
Panos
12-16-2004 09:53 AM
Thanks for the tips. I am on a class this week. Thus, I did not have time to replicate the problem. I am going to change the release notes.
12-16-2004 02:15 PM
Hi,
I have the same problem on my AP1200 and AP1100 as well. Since I upgraded to 12.3(2)JA the radio indicator LED stays on, Changed back to 12.2.15 XR2 and the turned off. Back again to 12.3(2)JA and the radio indicator led on both AP's stayed on. I don't have DHCP problems, Everything works but this is strange, not ?
01-11-2005 03:32 AM
Any sollution or any new firmware ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide