broadcasting ssid & sh dot11 vlan

[fujovoris]

I got questions:

1.Is there any way on WLC or LAP to check lightweight AP is actually broadcasting ssid and which ssids they’re broadcasting?

2. In Flexconnect LAP, what is the meaning of “sh dot11 vlan” vs “sh vlan”?

[Haydn Andrews]

easiest way it to scan the environment to see if broadcasting

If the WLAN ID is below 16 then it will broadcast on all APs above 16 will need to be in a AP group with the AP assigned to it.

[Leo Laohoo]

Sure. Check what AP Group the AP is a member of.