cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2354
Views
10
Helpful
7
Replies

c2600 boot loader issue

gee2yoakum
Level 1
Level 1

Hi I'm trying to upload boot loader file ap3g2-boot-m.124-25e thru tftp but system is unable to find file . Please help me to fix this . Thank you.

3 Accepted Solutions

Accepted Solutions

Sandeep Choudhary
VIP Alumni
VIP Alumni

check this:

 

https://lihaifeng.net/?p=216

 

Regards

Dont forget to arte helpful posts

View solution in original post

Thank you for reply. But Tftp timedout error shows. Thank you

View solution in original post

Hi Sandeep, I did watch video but some how I can't fix it. I did turnoff firewall,AV etc. Also Even I did try with crossover cable but same error timed out.On boot up with MODE  ap can't find ap3g2-boot.-m,124-25e.JA1 . Please help me to upload this boot file to ap. I've try all options  that I could find in Cisco Community but It failed to upload file. Every time I try to follow any of steps gives me either timed out error or file or directory can't find . Please help me to fix it, Thank you,Jay 

View solution in original post

7 Replies 7

Scott Fella
Hall of Fame
Hall of Fame

You can try to reference this post and make sure your tftp is working and your firewall is disabled.

Solved: Aironet LAP1142N - Upgrading bootloader - Cisco Community

-Scott
*** Please rate helpful posts ***

gee2yoakum
Level 1
Level 1

I tryed all but no luck, tftp server timedout also several attampts file not find or directory not found. Please help to download boot loader in it. I clear the flash for new ios , Thank you 

Well you really didn’t need to clear the flash. If you followed the guides and you still can’t tftp, you need to make sure that your tftp is pointing to the correct directory and there is not a firewall blocking.
-Scott
*** Please rate helpful posts ***

Try to look at some videos for additional help
https://m.youtube.com/watch?v=DYZm12PK6BU
-Scott
*** Please rate helpful posts ***

Thank you for reply. But Tftp timedout error shows. Thank you

Sandeep Choudhary
VIP Alumni
VIP Alumni

check this:

 

https://lihaifeng.net/?p=216

 

Regards

Dont forget to arte helpful posts

Hi Sandeep, I did watch video but some how I can't fix it. I did turnoff firewall,AV etc. Also Even I did try with crossover cable but same error timed out.On boot up with MODE  ap can't find ap3g2-boot.-m,124-25e.JA1 . Please help me to upload this boot file to ap. I've try all options  that I could find in Cisco Community but It failed to upload file. Every time I try to follow any of steps gives me either timed out error or file or directory can't find . Please help me to fix it, Thank you,Jay 

Review Cisco Networking for a $25 gift card