06-21-2020 02:06 AM - edited 07-05-2021 12:11 PM
Dear all
Does anyone know if it is possible to use multiple (secondary) IP Subnets for a wireless client VLAN on the C9800 IOS-XE platform?
With AireOS WLCs that was not supported and we had to use either one (primary) subnet per client VLAN/dynamic interface or we had to create multiple separate VLANs (with only one subnet per VLAN) and attach them to an interface group, if e.g. expansion was needed.
Many thanks!
06-21-2020 02:46 AM
- Read the paragraph starting from Roaming between policy tags
M.
06-21-2020 05:42 AM
Hello M.
Many thanks for your fast reply. My question is not directly related to roaming. I already read that section, but didn‘t find any hint regarding using multiple subnets within one single VLAN (like often used for LANs). I am aware that multiple VLANs can be bundled. But I was looking for a more „easy“ way to e.g add client subnets without the need of creating a lot of VLANs, interfaces, adding them to trunks on the switches, etc... I also wanted to avoid huge subnet sizes... Our campus is rather big, with thousands of clients. As client interfaces are handled differently with IOS—XE, my hope was it might be possible.
Anyway, thanks for you help
Joachim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide