I have a AIR-AP1852I-H-K9 cisco AP. The AP has been configured before. I want to change the ssid and password. But I can't access the config website(http/https). I can only use CLI. It seems like that I can not config the AP like a switch. cannot enter the config mode. So how can I change the configuration. Thanks a lot.
AP version:
ROM: Bootstrap program is U-Boot boot loader
BOOTLDR: U-Boot boot loader Version 31
AP-1 uptime is 9 days, 19 hours, 06 minutes
Last reload time : Thu Jul 15 23:54:02 UTC 2021
Last reload reason : Factory Reset
cisco AIR-AP1852I-H-K9 ARMv7 Processor rev 0 (v7l) with 967420/482756K bytes of memory.
Processor board ID xxx
AP Running Image : 8.3.121.0
Primary Boot Image : 8.3.121.0
Backup Boot Image : 8.4.100.0
AP Image type : MOBILITY EXPRESS IMAGE
AP Configuration : MOBILITY EXPRESS CAPABLE
2 Gigabit Ethernet interfaces
2 802.11 Radios
Radio FW version : 28dd9e80ad0b4c98f7cbc271019afb8e
NSS FW version : NSS.AK.1.0.c10-00017-E_custC-1.67978.1
Base ethernet MAC Address : 70:D3:79:E4:0C:78
Part Number : 0-0000-00
PCA Assembly Number : xxx
PCA Revision Number : 01
PCB Serial Number : xxx
Top Assembly Part Number : 000-00000-00
Top Assembly Serial Number : xxx
Top Revision Number : A0
Product/Model Number : AIR-AP1852I-H-K9
