can't get GUI on AP1231G-A-K9

Rita G. · ‎07-01-2017

i recently bought a used Cisco AP1231G-A-K9 access point and have no idea how to get to the GUI. I have been able to connect via console to com port using RJ45 to DB9 cable with hyper terminal on windows xp. Once connected, I have no idea how to proceed. Can someone please help me?

Scott Fella · ‎07-01-2017

Post the bootup process so we can see what code is running on the AP. You can also search for Cisco AP 1231 factory reset. Then you can use this guide as long as it's running an autonomous code you would see a k9w7.

see this link

https://supportforums.cisco.com/document/77131/understanding-access-point-os-images

To configure a 1231G see his link:

https://supportforums.cisco.com/document/61936/autonomous-ap-and-bridge-basic-configuration-template

-Scott

*** Please rate helpful posts ***

-Scott
*** Please rate helpful posts ***

Rita G. · ‎07-03-2017

) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:45:40.282: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:45:48.793: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:45:48.914: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:46:36.794: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:46:45.305: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:46:45.426: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:47:33.307: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:47:41.318: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:47:41.440: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:48:29.318: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:48:37.828: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:48:37.950: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:49:25.829: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:49:34.340: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:49:34.461: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:50:22.340: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:50:30.351: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:50:30.472: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:51:18.355: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:51:26.864: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:51:26.987: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:52:14.866: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:52:23.376: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:52:23.498: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:53:11.378: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:53:19.890: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:53:20.012: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:54:07.891: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:54:15.902: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:54:16.024: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:55:03.904: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:55:12.414: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:55:12.536: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:56:00.415: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:56:08.925: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:56:09.047: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:56:56.926: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:57:05.437: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:57:05.558: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:57:53.440: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:58:01.451: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:58:01.573: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:58:49.452: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. Not in Bound state. *Mar 1 00:58:57.963: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:58:58.084: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) áÃ Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C1200 Software (C1200-K9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Tue 18-Oct-11 14:37 by prod_rel_team Proceeding with system init Proceeding to unmask interrupts Initializing flashfs... flashfs[1]: 8 files, 2 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 7483392 flashfs[1]: Bytes used: 3454464 flashfs[1]: Bytes available: 4028928 flashfs[1]: flashfs fsck took 3 seconds. flashfs[1]: Initialization complete....done Initializing flashfs. Radio0 present A506 5100 E8000000 A0000000 80000000 3 Radio1 present A506 6700 E8000100 A0040000 80010000 2 This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. %Error opening flash:/c1200-rcvk9w8-mx/info (No such file or directory)cisco AIR -LAP1231G-A-K9 (PowerPC405GP) processor (revision B0) with 15038K/1336K byte s of memory. Processor board ID FTX0851R1DH PowerPC405GP CPU at 196Mhz, revision number 0x0145 Last reset from power-on LWAPP image version 7.0.220.0 1 FastEthernet interface 2 802.11 Radio(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:12:80:AF:B4:2C Part Number : 73-8704-08 PCA Assembly Number : 800-23211-09 PCA Revision Number : A0 PCB Serial Number : FOC08471U0W Top Assembly Part Number : 800-23304-08 Top Assembly Serial Number : FTX0851R1DH Top Revision Number : A0 Product/Model Number : AIR-AP1231G-A-K9 % Please define a domain-name first. no ip http server ^ % Invalid input detected at '^' marker. Press RETURN to get started! *Mar 1 00:00:05.274: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t est passed *Mar 1 00:00:06.550: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 *Mar 1 00:00:08.119: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 *Mar 1 00:00:08.156: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 92 messages) *Mar 1 00:00:08.751: status of voice_diag_test from WLC is false *Mar 1 00:00:09.926: STUB Called : crypto_ssl_init *Mar 1 00:00:11.056: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up *Mar 1 00:00:11.107: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C1200 Software (C1200-K9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Tue 18-Oct-11 14:37 by prod_rel_team *Mar 1 00:00:11.216: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY *Mar 1 00:00:11.266: SSC Load Current Size crypto_mykey 120, offset 9368, Saved Size soap_cert_crypto_mykey 124 *Mar 1 00:00:11.272: %SSH-5-ENABLED: SSH 2.0 has been enabled *Mar 1 00:00:11.272: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up *Mar 1 00:00:11.272: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r eset *Mar 1 00:00:11.719: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up *Mar 1 00:00:11.759: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r eset *Mar 1 00:00:12.059: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0, changed state to up *Mar 1 00:00:12.158: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up *Mar 1 00:00:12.282: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio 0, changed state to up *Mar 1 00:00:12.282: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio 1, changed state to up *Mar 1 00:00:20.395: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c *Mar 1 00:00:30.926: status of voice_diag_test from WLC is false *Mar 1 00:00:31.165: Logging LWAPP message to 255.255.255.255. Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) *Mar 1 00:01:32.757: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP . Renewing DHCP IP. *Mar 1 00:01:33.758: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255. 255 started - CLI initiated Not in Bound state. *Mar 1 00:01:42.278: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination . *Mar 1 00:01:42.399: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1) Xmodem file system is available. flashfs[0]: 9 files, 2 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 7741440 flashfs[0]: Bytes used: 3454464 flashfs[0]: Bytes available: 4286976 flashfs[0]: flashfs fsck took 12 seconds. Reading cookie from flash parameter block...done. Base ethernet MAC Address: 00:12:80:af:b4:2c Initializing ethernet port 0... Reset ethernet port 0... Reset done! ethernet link up, 100 mbs, full-duplex Ethernet port 0 initialized: link is up button pressed for 2 seconds process_config_recovery: set IP address and config to default 10.0.0.1 Loading "flash:/c1200-k9w8-mx.124-23c.JA3/c1200-k9w8-mx.124-23c.JA3"...######### ################################################################################ ################################################################################ ################################################################################ ########################## File "flash:/c1200-k9w8-mx.124-23c.JA3/c1200-k9w8-mx.124-23c.JA3" uncompressed a nd installed, entry point: 0x3000 executing... Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C1200 Software (C1200-K9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Tue 18-Oct-11 14:37 by prod_rel_team Proceeding with system init Proceeding to unmask interrupts Initializing flashfs... flashfs[1]: 8 files, 2 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 7483392 flashfs[1]: Bytes used: 3454464 flashfs[1]: Bytes available: 4028928 flashfs[1]: flashfs fsck took 2 seconds. flashfs[1]: Initialization complete....done Initializing flashfs. Radio0 present A506 5100 E8000000 A0000000 80000000 3 Radio1 present A506 6700 E8000100 A0040000 80010000 2 This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. %Error opening flash:/c1200-rcvk9w8-mx/info (No such file or directory)cisco AIR -LAP1231G-A-K9 (PowerPC405GP) processor (revision B0) with 15038K/1336K byte s of memory. Processor board ID FTX0851R1DH PowerPC405GP CPU at 196Mhz, revision number 0x0145 Last reset from power-on LWAPP image version 7.0.220.0 1 FastEthernet interface 2 802.11 Radio(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:12:80:AF:B4:2C Part Number : 73-8704-08 PCA Assembly Number : 800-23211-09 PCA Revision Number : A0 PCB Serial Number : FOC08471U0W Top Assembly Part Number : 800-23304-08 Top Assembly Serial Number : FTX0851R1DH Top Revision Number : A0 Product/Model Number : AIR-AP1231G-A-K9 % Please define a domain-name first. no ip http server ^ % Invalid input detected at '^' marker. Press RETURN to get started! *Mar 1 00:00:04.263: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t est passed *Mar 1 00:00:05.538: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 *Mar 1 00:00:07.107: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 *Mar 1 00:00:07.143: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 92 messages) *Mar 1 00:00:08.653: status of voice_diag_test from WLC is false *Mar 1 00:00:09.826: STUB Called : crypto_ssl_init *Mar 1 00:00:09.829: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up *Mar 1 00:00:10.957: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0, changed state to up *Mar 1 00:00:11.007: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C1200 Software (C1200-K9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Tue 18-Oct-11 14:37 by prod_rel_team *Mar 1 00:00:11.116: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY *Mar 1 00:00:11.166: SSC Load Current Size crypto_mykey 120, offset 9368, Saved Size soap_cert_crypto_mykey 124 *Mar 1 00:00:11.171: %SSH-5-ENABLED: SSH 2.0 has been enabled *Mar 1 00:00:11.171: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up *Mar 1 00:00:11.172: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r eset *Mar 1 00:00:11.619: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up *Mar 1 00:00:11.656: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r eset *Mar 1 00:00:12.099: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up *Mar 1 00:00:12.172: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio 0, changed state to up *Mar 1 00:00:12.172: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio 1, changed state to up *Mar 1 00:00:20.295: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c *Mar 1 00:00:30.820: status of voice_diag_test from WLC is false *Mar 1 00:00:31.064: Logging LWAPP message to 255.255.255.255. Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1 ) Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1)

Rita G. · ‎07-03-2017

that is the boot process . .i think

I have no idea what to do next.

Scott Fella · ‎07-03-2017

Your AP is running a lightweight image, what you need for a standalone AP is autonomous image. The issue is that you need a support contract to download an autonomous image. An AP with a lightweight image has no GUI and requires a WLC.

-Scott

*** Please rate helpful posts ***

-Scott
*** Please rate helpful posts ***

Rita G. · ‎07-03-2017

thank you scott for your replies.

i don't have a 'support contract', so what is a WLC and how do i get one?

Scott Fella · ‎07-03-2017

You can find them cheap on eBay:

https://www.serversupply.com/products/part_search/pid_query.asp?pid=285681

Just make sure you can get a code from the person whom is selling it. Look at the WLC matrix to see what code is supported:

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

-Scott

*** Please rate helpful posts ***

-Scott
*** Please rate helpful posts ***

Rita G. · ‎07-03-2017

. . sheesh . i was hoping i could use this dam thing for a wifi ap and its one headache after another! isn't there any way i can use it as a simple household ap? when i bought it from newegg they gave no indication that it would be one expense after another . .

Scott Fella · ‎07-03-2017

The only way you could use it the way you want is to obtain the autonomous code and convert the AP.

Try this... enter this command on your AP:

debug capwap console cli

dir

post that update.

I have a bunch of old 1242's like 10+ and a 1252 I used in my lab:)

-Scott

*** Please rate helpful posts ***

-Scott
*** Please rate helpful posts ***

Rita G. · ‎07-03-2017

AP0012.80af.b42c#debug capwap console cli
This command is meant only for debugging/troubleshooting
Any configuration change may result in different
behavior from centralized configuration.

CAPWAP console CLI allow/disallow debugging is on
AP0012.80af.b42c#
*Mar 1 00:03:24.205: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.dir
Directory of flash:/

2 -rwx 574 Mar 1 2002 00:00:08 +00:00 env_vars
6 drwx 320 Oct 9 2012 03:00:52 +00:00 c1200-k9w8-mx.124-23c.JA3
4 -rwx 18456 Mar 1 2002 00:00:30 +00:00 private-multiple-fs
5 -rwx 7594 Apr 23 2013 06:30:13 +00:00 event.log

7483392 bytes total (4028928 bytes free)
AP0012.80af.b42c#
Not in Bound state.
*Mar 1 00:03:32.715: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination
.
*Mar 1 00:03:32.837: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 192.168.102.153, mask 255.255.255.0, hostname AP0012.80af.b42c

Translating "CISCO-CAPWAP-CONTROLLER.localdomain"...domain server (192.168.102.1
)

Translating "CISCO-LWAPP-CONTROLLER.localdomain"...domain server (192.168.102.1)

*Mar 1 00:04:20.715: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.

Scott Fella · ‎07-03-2017

No luck. I was hoping there was an autonomous image also but there isn't.

-Scott

*** Please rate helpful posts ***

-Scott
*** Please rate helpful posts ***

Rita G. · ‎07-04-2017

This thing is labeled AIR-AP1231G-A-K9 and it is loaded with the wrong software? Should it not be labeled LAP1231G-A-K9?