Can we create Mobility group between WISM2 and WLC 5500

[Ahmed Ayaad]

Dears,

I need your feedback urgent please,

Can we create Mobility Group between WISM2 and WLC 5500

Firmware for WISM2 > 7.4.121.0

Firmware for WLC5500 > 6.0.196.0

I created Mobility Group with (IP address , MAC Address and Mobility group name) for Foreign Controller. if any configuration required from my side.

Wait your feedback urgent please

Regards,

[luceroc]

Yes I have done this before.    The hardware should not be the issue.  Plus those versions of code I have personally created MGs but with the reverse 7.4 on my 5500 and 6.0 on my WISM2.  I can;t see this being an issue.

[Sandeep Choudhary]

Hi,

Controllers do not have to be of the same model to be a member of a mobility group. Mobility groups can be comprised of any combination of controller platforms.

Thats enough :)

Regards

Dont forget to rate helpful posts