09-13-2012 11:39 AM - edited 07-03-2021 10:40 PM
I am trying to configure this newly purchased AP to be used for WiFi surveys, heatmaps, etc..
I cant seem to get to the web interface of the AP to make config changes, even though it is picking up an IP via DHCP and it is pingable.
Any help would be appreciated.
Thanks,
Kevin
Solved! Go to Solution.
09-13-2012 11:48 AM
The LAP1262 is running the CAPWAP image by default You need to download the IOS image and load it to the AP. Then you will be able to configure the AP.
Follow the steps in the link below:
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
09-13-2012 11:48 AM
The LAP1262 is running the CAPWAP image by default You need to download the IOS image and load it to the AP. Then you will be able to configure the AP.
Follow the steps in the link below:
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
09-13-2012 12:24 PM
Awesome, thanks for the info.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide