Wireless

I have a Cisco 881G router with WAN connected via cellular 0 and working fine but for some reason it is connected using 2G Edge Service and when i went through the config, it is showing PACKET SERVICE = EDGE (Activated) and not PACKET SERVICE = HSPA ...

I have a Cisco 881G router connected via cellular 0 and working fine but for some reason it is connected using 2G Edge Service and when i went through the config, it is showing PACKET SERVICE = EDGE (Activated) and not PACKET SERVICE = HSPA  , the si...

HiI've got. 4 WISM (1) 7.0.230.6 of the controllers can see each other and one of these is selected as a leader.The other 2 have formed their own rf grouping.The RF GRouping name is the same for all 8 controllers and there are APs on all of these.The...

Hi Guys,We plan on buying a Cisco 2700 wireless location appliance but I need to know if it will be compatible with our 2500 WLC.I've tried to look but cant find any document for this. Also can you deploy the location appliance without a WCS?Thanks,R...

Hi all.I discovered a software vulnerability related to Cisco wireless LAN controllers back in June 2012. I immediately reported this to Cisco PSIRT (Product Security Incident Response Team). As of 23rd January 16:00 UTC, Cisco has released a public ...

I am the process of developing a wireless guest splash page although I can not find a good deployment guide. I would like to provide a solution for guest clients to accept terms of agreement using HTTP not HTTPS. I also would like to see a splash pag...

Hi all,With the new mobility architecture on Converged Access controller platforms, do we need to have a dedicated controller to perform the MC role within  the mobility domain serviced by the MC.I  think that a MC should be able to perform the MA ro...

Hi there,I use a few 600OEAP and I love them. But there is thing I don't like and maybe I just didn't find the right way to fix that.In some szenarios I have the OEAP connected to an public IP, on exibitions sometimes e.g. or with really cool DSL pro...

Hi, I have some LAP1242 which by mistake were bought for Mesh. I am trying to convert them to LWAPP so what I did first was to convert them to Stand Alone then to LWAPP but I cannot get the AP to join the WLC and sends several error logs.I attached s...

Hey all, I've recently gotten a request that I need some help with.  We have a small network which is a mixture of Wired and Wireless and on the Wireless network we have several SSID's a couple using 802.1X authenticaion and a couple using PSK.  We a...

HiI look after the wireless LAN in a hospital, several buildings 6 floors fully triangulated.I've checked the channel Assignment, this is set to automatic, interval 12hrs.What do other people have theirs set theirs to.Cheers

On my WLC, our security scans are showing that the WLC responds with the presence of a /images/ folder. When you browse to the WLC, https://10.x.y.z/images/ I get a EmWeb Server splash page that shows up. Anyone know of a way to turn this off or disa...