Cannot see if AP joined to wlc from ap side

[eigrpy]

Hi,  Cisco AP and WLC can ping each other. and the AP looks like joined to wlc, but I cannot see any debug message at AP side and cannot see the AP in WLC. Do we have some commands at AP side for us to test and see the status of the WLC and the AP? Thanks

[Leo Laohoo]

Post the complete output to the following WLC commands: 

sh sysinfo
sh time

Post the complete output to the following AP commands: 

sh version
sh ip interface brief
sh log
sh inventory
sh capwap client rcb

[Mark Elsen]

   - Cold-start the AP again, and look at the controller logs, for further info's on joined or not.

 M.