Cant connect to Lightweight AP

[gabriel.garcia]

HI,

Ive bought a few weeks ago a Cisco air CAP-702l. Its a Controller based one. I want to make a conversion from Lightweight to Autonomous but I cant connect to the AP using 10.0.0.1. My PC has the IP 10.0.0.2. What is wrong?

[Rasika Nayanajith]

Use below references, you need to use mode button to reset it to default configurations.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01101010.html#ID1151

https://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/

HTH

Rasika

*** Pls rate all useful responses ***