07-10-2019 05:30 AM - edited 07-05-2021 10:41 AM
Hello,
I have an isssue to configure the catalyst 9800 for network-assurance, first problem is that the token may not be loger than 127 characters, and the generated token on the DNAC the PEM file is longer, I only found examples for the airos but not for the C9800 - we have DNAC 1.3 and Catalyst is on 16.11.1c, can you help or is there a docummentation that describes the steps (dd not found it)
Thanks,
Peter
10-16-2019 02:14 AM
10-16-2019 02:45 AM
Hi Dominic,
Problem was solved token for the catalyst 9800 is not needed.
The problem was that the device controllability was disabled.
Best Regards,
Peter
10-16-2019 03:43 AM
Hi Peter
sorry for the stupid question, but what did you exactly configure, to get it working? Do you have a printscreen of the required configuration (for example Cisco C9800 GUI > Configuration > Services > Cloud Services or Cisco C9800 CLI)?
Best regards
Dominic
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide