Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What is the maximum latency allowed between the WLC and the access point that is configured in flexconnect mode where the flexconnect group is configured for local authentication and local switching?
Round-trip latency must not exceed 300 milliseconds (ms) between the access point and thecontroller, and CAPWAP control packets must be prioritized over all other traffic. In scenarios where you cannot achieve the 300-ms round-trip latency, configure the access point to perform local authentication.
Round-trip latency must not exceed 300 milliseconds (ms) between the access point and thecontroller, and CAPWAP control packets must be prioritized over all other traffic. In scenarios where you cannot achieve the 300-ms round-trip latency, configure the access point to perform local authentication.
