choosing external Antenna for 1252 AP

[mahesh18]

Hi everyone,

I have few external antenna for few 1252 AP's need to know should i connect them to 2.4 GHZ or 5.4GHZ?

Its for internal use inside the building.

Also i have one AIR ANT2430V-R need to if i put 1252 inside the ceiling then users can connect to AP via Signals from AIR ANT2430V-R?

Regards

Mahesh

[Scott Fella · Accepted solution]

That antenna is for 2.4ghz only:

http://www.cisco.com/c/en/us/td/docs/wireless/antenna/installation/guide/ant2430v.html

You would need a 5ghz antenna if you want to use the 5ghz.  Here is Cisco's antenna reference guide

http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/product_data_sheet09186a008008883b.html

-Scott

[Scott Fella · Accepted solution]

Here is one that has both bands: AIR-ANT2451NV-R=

-Scott

[mahesh18]

Many thanks Scott

Regards

MAhesh