Circular shape problem on Prime 1.4

[Ahmed Ayaad]

Dears,

I created site map on PI 1.4 and added AP on this map but actually the coverage area it seem horizontal lines not circular shape i edit more than one time in Azimuth and Elevation but the AP still seems as horizontal line how come i get circular shape for AP coverage area.

PI 1.4 & AP Model 2602I

Wait your feedback ASAP.

Regards,

[Saurav Lodh]

check "Guidelines for Inclusion and Exclusion Areas on a Floor" from,

http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-4/configuration/guide/pi_14_cg/maps.html#pgfId-1671523