Cisco 350 Wireless Bridge Issues

[rjanakan]

Hello,

I'm using Cisco 350 wireless bridge for my field data collection work. I have few issues with that.

1. Sometimes, the bridge goes to factory default IP (10.0.0.1). What could be the cause? I give power supply to the PoE Injector from a vehicle battery.

2. When the clients go out of range and come back, I'm able to associate with the bridge but not able to reach any devices connected to the bridge(thro' ping). So, I have to disable the client card(Cisco 350 WLAN adapter) and re enable it to able to reach other devices. Is there a problem with bridge or client adapter?

I'd greatly appreciate any help on these issues.

Regards,

Janakan Rajendran.

[pradeepde]

The following troubleshooting document for Wireless bridge should give you an idea on how to troubleshoot your problem,

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350brdgs/brscg/br350c13.htm

[rjanakan]

Hi,

Thanks for your effort. I've been thro' that site before and if you notice the problems that I have, they can't be found on that site.

-Janakan Rajendran