I'm currently running a Cisco 5508 WLC. I currenlty want to use two Gigabit ports for Wireless traffic and I will only have 25 1142 Attached to this WLC. Reading the Cisco Wireless LAN Controller Configuration Guide, Release 6.0 it says :
5500 Series Controller Example
For a 5500 series controller, Cisco recommends having eight dynamic AP-manager interfaces and associating them to the controller's eight Gigabit ports. If you are using the management interface, which acts like an AP-manager interface by default, you need to create only 7 more dynamic AP-manager interfaces and associate them to the remaining seven Gigabit ports.
I was hoping to use LAG for these two ports and create a Port Channel on the switch for these ports. From Cisco's recommendation it sounds like I have to turn off LAG and create a dynamic interface for the second port and put that Port in a different VLAN. Can anyone please shed some light on this. Everything is working at the moment but I'm just curious why this recomendation. Any help would be greatly appreciated.
