Cisco 5508 to 9800 WLC migration with Guest Anchors

[dm2020]

Hi All,

I'm working on another migration from a Cisco 5508 WLC with a 5508 Guest Anchor to a Cisco 9800 WLC and 9800 Guest Anchor. I'm planning on upgrading the two 5508s to the require IRCM images and then looking to build a mobility tunnel between the two main WLCs, however I'm not sure if I need to create mobility tunnels between the main WLCs and both Guest Anchors if that makes sense?

This is similar to what I'm trying to deploy but with the addition of a new 9800 Guest Anchor. In this scenario, will I also need to build a mobility tunnel between the AireOS WLC and 9800 Guest Anchor and between the Catalyst WLC and AireOS Guest Anchor?

Thanks all

[Rasika Nayanajith]

"however I'm not sure if I need to create mobility tunnels between the main WLCs and both Guest Anchors if that makes sense?"

Not required. Only mobility tunnels are required between your 5508 Foreign (internal WLC that mange AP) to 9800 Anchor.

HTH

Rasika
*** Pls rate all useful responses ***