cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
278
Views
0
Helpful
0
Replies

CISCO 819-4G Router Configuration for Prefix Delegation Support

soumyakanta.das
Level 1
Level 1

Hi

I am trying to configure a CISCO 819-4G Router Configuration for Prefix Delegation.  First thing i would like to know if this model of the router supports this feature or not.

For this feature, the router is supposed to send a SOLICT message to the ASR5k. 

As per our configuration, 

In the debug traces of the router, we see the Solicit messages being sent out from the router but they are not reaching to ASR5k. we traced at ASR5k and other nodes and we dont see the message reaching there.

i.e. 

========================================= 

*Oct 31 17:10:15.083: IPv6 DHCP: Sending SOLICIT to FF02::1:2 on Cellular0

*Oct 31 17:10:15.083: IPV6: source FE80::CF3:EAFF:FEA1:308 (local)

*Oct 31 17:10:15.083:       dest FF02::1:2 (Cellular0)

*Oct 31 17:10:15.083:       traffic class 224, flow 0x0, len 96+0, prot 17, hops 255, originating

*Oct 31 17:10:15.083: CFT FE: ------- IOS IPv6 Packet Dump ----------

 

*Oct 31 17:10:15.083: CFT FE: next header: 0x11

 

*Oct 31 17:10:15.083: CFT Engine: cft_ipv6_process_output: cft packet ran thru the engine

*Oct 31 17:10:15.083: Ce0 DDR: ipv6 (s=FE80::CF3:EAFF:FEA1:308, d=FF02::1:2), 96 bytes, outgoing interesting (ipv6 PERMIT)

*Oct 31 17:10:15.083: DDR: 6E000000 003811FF FE800000 00000000 0CF3EAFF FEA10308

*Oct 31 17:10:15.083: DDR: FF020000 00000000 00000000 00010002 02220223 00389C3F

*Oct 31 17:10:15.083: Ce0 DDR: sending broadcast to default destination

*Oct 31 17:10:15.083: IPv6-Fwd: Sending on Cellular0

 

======================================= 

We would like to know if the router Is sending out the SOLICIT message correctly on the right interface or not. 

I am attaching the router config and the debug logs for reference. 

Kindly assist us with any support on this.

0 Replies 0
Review Cisco Networking for a $25 gift card