cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2136
Views
0
Helpful
2
Replies

Cisco 887G

Ackld2009
Level 1
Level 1

Hi

I am trying to setup Cisco 877g router with PREPAID Telecom 3G GSM SIM card. After plugging the SIM card to 877G I got 1 solid green light and 1 steadily blink green light. Following is the "show cellular 0 all". Can anybody please help me? I am testing it on prepaid Sim Card to make sure it is right.

Thanks.

2 Replies 2

Ackld2009
Level 1
Level 1

Remote-Mobile-Site#sh cellular 0 all

Hardware Information

====================

Modem Firmware Version = K2_0_7_35AP C:/WS/F

Modem Firmware built = 03/04/10

Hardware Version = 1.0

International Mobile Subscriber Identity (IMSI) = xxxxxxxxxxxxxxx

International Mobile Equipment Identity (IMEI) = xxxxxxxxxxxxxxx

Integrated Circuit Card ID (ICCID) = 8964050011083471701

Mobile Subscriber International Subscriber

IDentity Number (MSISDN) =

Factory Serial Number (FSN) = D9E260018301004

Modem Status = Online

Current Modem Temperature = 24 deg C, State = Normal

PRI SKU ID = xxxxxxx, SKU Rev. = 1.2

Profile Information

====================

Profile password Encryption level: 7

Profile 1 = INACTIVE*

--------

PDP Type = IPv4

Access Point Name (APN) = internet.telecom.co.nz

Authentication = CHAP

Username: xxxxx, Password: xxxx

Profile 2 = INACTIVE

--------

PDP Type = IPv4

Access Point Name (APN) = www.vodafone.net.nz

Authentication = CHAP

Username: xxxxxx, Password: xxxxxxxx

* - Default profile

Data Connection Information

===========================

Data Transmitted = 0 bytes, Received = 0 bytes

Profile 1, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 2, Packet Session Status = INACTIVE

        Inactivity Reason = Service option not subscribed

Profile 3, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 4, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 5, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 6, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 7, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 8, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 9, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 10, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 11, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 12, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 13, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 14, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 15, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Profile 16, Packet Session Status = INACTIVE

        Inactivity Reason = Normal inactivate state

Network Information

===================

Current Service Status = Normal, Service Error = Requested service option not subscribed

Current Service = Combined

Packet Service = HSPA (Attached)

Packet Session Status = Inactive

Current Roaming Status = Home

Network Selection Mode = Automatic

Country = NZL, Network = Telecom

Mobile Country Code (MCC) = 530

Mobile Network Code (MNC) = 5

Location Area Code (LAC) = 11000

Routing Area Code (RAC) = 0

Cell ID = 30653

Primary Scrambling Code = 286

PLMN Selection = Automatic

Registered PLMN =  , Abbreviated =

Service Provider = Telecom

Radio Information

=================

Radio power mode = ON

Current Band = WCDMA 850, Channel Number = 1062

Current RSSI = -84 dBm

Band Selected = Auto

Number of nearby cells = 1

Cell 1

        Primary Scrambling Code = 0x11E

        RSCP = -84 dBm, ECIO = -11 dBm

Modem Security Information

==========================

Card Holder Verification (CHV1) = Disabled

SIM Status = OK

SIM User Operation Required = None

Number of CHV1 Retries remaining = 3

Finally the issue was resolved. I managed to get it going and Easy VPN is working as well.  3G is working great and fast. Just close this ticket please Administrator.

Review Cisco Networking for a $25 gift card