08-02-2017 11:54 PM - edited 07-05-2021 07:29 AM
One of my Access Point Aironet 1600 is unable to ping from LAN, but it is accessible from core switch. And it is showing as Router (Capability RTI) in Switch CDP neighbors list.
08-03-2017 01:36 AM
I would check if there is any ACL applied on those vlans ?
Rasika
08-03-2017 02:04 AM
Hi Rasika, No ACL. But the other ap's are working with the same ip and port. I am able to ping to gateway and but not to other vlan. And the other ap's are showing as Trans Bride (TI) in cdp neighbors list, but this is showing as Router (RTI)
08-06-2017 01:05 AM
I have fixed the problem by "no ip routing" command.
My Cisco access point version is 15.2(2)JB , IP ROUTING is enabled by default and it should not be.
Thanks...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide