cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1254
Views
0
Helpful
4
Replies

cisco Aid issue

M.abdellatif545
Frequent Visitor
Frequent Visitor

hello all 

I have issue with wireless access for devices connected to through WIFI the problem is the device connect and disconnect

I change the device but same vendor and change the access point all make same result i use debug to see where is the problem and this what i found

disc_client_reset_ctrlr_slotunit: MAC xxxx.xxxx.xxxx newclient 0x5772C88 OLD slot 255
Oct 18 09:53:57.173: 2E00BC19-0 832D96 -
disc_client_radiohop_handle: MAC 0000.0000.0000 oldclient addr 0x0 NEW slotunit 0 newclient addr 0x5772C88 NEW slotunit 0
Oct 18 09:53:57.173: 2E00BC27-0 832D96 - uapsd_compliant_client 0
Oct 18 09:53:57.173: 2E00BD16-0 832D96 - KeySet1 session key type 604 aid 2 len 16, idx: 1, 38F1367AC35AD2A8
Oct 18 09:53:57.213: 2E0164F2-0 832D96 - fc C0 mode 33B0 st 40004/1A
Oct 18 09:53:57.213: 2E01654B-0 832D96 - stop: request aid 2
Oct 18 09:54:16.832: 2F2CBA15-0 832D96 - delete timeout
Oct 18 09:54:16.832: 2F2CBBF6-0 832D96 - freed
Oct 18 09:54:16.832: 2F2CBC36-0 832D96 - delete session key, AID 2
Oct 18 09:54:16.832: 2F2CBD65-0 832D96 - Not a Flex connnected,not holding AID 2

 

it says that the device not holding the AID (Association Id)

I found this bug CSCve81314 on cisco WLC

The issue does not affect Cisco IOS APs that run in autonomous mode.

my AP is a stand-alone AP (autonomous AP) 

flash:/ap3g2-k9w7-mx.153-3.JA12/ap3g2-k9w7-xx.153-3.JA12

I need your experience on this issue and thank you...

4 Replies 4

Mark Elsen
Hall of Fame
Hall of Fame

 

  - Try the latest autonomous-software-version for the particular ap-model.

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

same AP with the same ver working without problem in a different branch 

 

 - Bug conditions can have complex-causes due to specific circumstances , such as client model. channel use , other clients, capacities, resources and much more , therefore the advice is still applicable.

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

Well you kind of isolated the issue... have you tried to swap out that ap for another?  Also, you should try to test with a different SSID just to see what the results are.  

-Scott
*** Please rate helpful posts ***
Review Cisco Networking for a $25 gift card