cisco AIR-CAP1602E-E-K9 fail to join controller

[Amir_selim]

Dears,

i see this log when i connected Cisco Ap's and can't join the controller but when i ping on the controller i see it up !!

so how can i fix it ??

*Aug 29 19:40:30.019: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Aug 29 19:40:40.019: %CAPWAP-3-ERRORLOG: Go join a capwap controller 
*Aug 29 19:40:40.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: x.x.x.x peer_port: 5246
*Aug 29 19:40:40.555: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: x.x.x.x peer_port: 5246
*Aug 29 19:40:40.555: %CAPWAP-5-SENDJOIN: sending Join Request to x.x.x.x
*Aug 29 19:40:40.571: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Aug 29 19:40:40.571: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Aug 29 19:40:40.571: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Aug 29 19:40:40.571: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from x.x.x.x
*Aug 29 19:40:45.555: %CAPWAP-5-SENDJOIN: sending Join Request to x.x.x.x
logging facility kern

Best regards,

[Leo Laohoo]

Post the following output:  

1.  WLC:  sh sysinfo; 

2.  AP:  sh version

[Javier Contreras]

WLCCA forum is not for general questions, moving this thread to the correct forum

[mohanak]

LAP displays %CAPWAP-3-ERRORLOG messages when AP join

CSCuh46442

Description

Symptom:
LAP displays %CAPWAP-3-ERRORLOG messages when AP join to WLC

%CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
%CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
%CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
%CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 172.22.170.1

Conditions:
AP join

Workaround:
na

Further Problem Description:

Known Fixed Releases:

(2)

8.0(100.0)

8.0(72.11)