Cisco Aironet 1242 AG

[bertrand196]

Hello, I have a Cisco 1242 ag, but I can not configure it I try to press mode on start but nothing makes the status LED blinks green, red, orange radio red or orange et ethernet in Green, when i try to connect with such net it tells me Password required, but none set thanks to you

[jonathan.cuthbert · Accepted solution]

You can drop into ROMMON and wipe the config. 

[bertrand196]

I do not know how to go in ROMMON, if you made an illusion to squeeze the mode button at startup until ethenet be orange I try my it does not change anything thanks.

[jonathan.cuthbert]

You would enter ROMMON through the Serial Connection.  Use the "Break" Command during startup to get to ROMMON.

https://roshanznet.blogspot.com/2015/10/configure-cisco-aironet-2620i-light.html

http://www.mostlynetworks.com/2012/12/recovering-a-cisco-ap-from-rommon/

http://www.cisco.com/public/technotes/smbsa/en/us/wireless/Rec_Acc_Pt_from_Corr_Misng_Soft_Image.pdf

[bertrand196]

Here is what appears when I connect to the terminal then disappear I can do nothing thanks

[jonathan.cuthbert]

That is not ROMMON.  What terminal program are you using?  Do you know how to find the Break command?

Do you have the Software to reinstall?

[bertrand196]

I use Putty for the break command you have to do a right cli and select special command and then break, no I have not found the program to install thanks to you.

[Leo Laohoo]

1. Power off the AP; 
2. Hold down the Mode button; 
3. While holding the Mode button, power on the AP;
4. Wait for another 10 seconds before releasing the Mode button. 

[bertrand196]

I tried the LED status turns yellow and the orange Ethernet LED, and after it restarts 3 green LED then red green green status and green Ethernet but still unable to connect thank you

[Leo Laohoo]

Console into the AP and post the output when doing the Mode button option.  I want to see what the AP is doing.

[bertrand196]

Hello, when it presses on the console it happens this status blue radio blinks green, status yellow ethenet red for about 40 sec then status ethenet green all three, status white, status green radio flashes red, staus flashes orange radios red fix , If I stay press 20 to 30 sec on radio I have violet radio status to light thank you

[Leo Laohoo]

We would really like to see the output from the console.

[bertrand196]

I do not understand what you ask me, you steal a photo, or video thank you

[bertrand196]

Hello I have everything to try but nothing works I am to hope I pence what is HS thanks