Cisco Aironet 1815t Model without using the external powersupply

[kvsa]

Hi,

is it possible to use the Cisco Aironet 1815t Model without using the external powersupply, e.g. powering it with a poe-switch ?

kind regards

Tobias

[pieterh · Accepted solution]

don't looks like it, but it CAN supply PoE to another device like a camera or so.

you may look at the 1815w if you want PoE-powered model 

Cisco Aironet 1815w

Powering options

●  802.3af/at Ethernet switch ●  Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)

[kvsa]

thanks for research!

1815w was my previous choice, but the uplinkport to the switch is on the back! The AP will be placed on a desk (no wall mounting), so uplinkports on the back is a "no go".

[Scott Fella]

The 1815T requires the supplied power supply. What I have done for teams that were testing is I also got the 1815W and purchased a single gang box and used heavy duty double sided tape to mount the 1815W on the table top. This way users would be able to connect devices to port 2/3.

[Scott Fella]

Here are some pics that I had. You can also mount these under the desk or find a smaller gang box.