Cisco aironet 2600 series AP configuration with windows 2008 R2 Radius server.

[Tech Man]

I want to know the configuration of Cisco aironet 2600 series AP with windows 2008 R2 Radius server.  

I have

1. AD & DHCP Server

2. Cisco Aironet 2600 Access Point.

I want to connect wifi devices through this AP. Authentication should be through Radius server and AD.

[SANTHOSHKUMAR SARAVANAN]

Hi , 

Below link should support your requirement 

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116584-configure-wirelesslan-00.html

Minimal command : -

AP(config)# aaa new-model
 AP(config)# radius-server host 172.20.0.1 auth-port 1645 acct-port 1645 key XXXXXX
 AP(config)# radius-server deadtime 10

HTH

Sandy

[rosaho]

This discussion has been reposted from Cisco User Groups to the Getting Started with Wireless community.