Cisco AP 1242G

[MajidShirzadeh]

Hello all,

I have a 1242G, how can I use that with open authentication,I wanna use as a simple network, I don't want to manage that with 5508, is there any way to setup wizard on it.

Thanks

Sent from Cisco Technical Support iPhone App

[Sandeep Choudhary]

HI ,

If you dont want to manage AP with WLC then convert it to Lightweight to Autonomous AP.

1. Download K9w7 image from cisco.

here is the link: http://software.cisco.com/download/release.html?mdfid=280237322&flowid=7588&softwareid=284180979&release=12.4.25d-JA2&relind=AVAILABLE&rellifecycle=ED&reltype=latest

2. Follow these procedure to convert:

https://supportforums.cisco.com/document/57476/lwapp-autonomous-conversion-and-vice-versa-access-points

http://rscciew.wordpress.com/2014/05/07/access-point-conversion-lap-to-aap-and-vice-versa/

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

Regards

Dont forget to rate helpful posts

[abwahid]

Hi,

Go through tha attached AP configuration guide and also check the below quick start guide.

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1240/quick/guide/ap1240qs.html