Cisco AP 1572 autonomous configuration

[csocorro1]

Good afternoon,

I have an outdoor AP 1572 connected to an AIR-ANT2513P4M-N= antenna. The access point is powered using POE that connects to a SB SG300 switch.

I configured the Access Point to autonomous, with Version 15.3(3)JC.

The problem is that when I configured the AP (SSIDs, security, ...), there was no possible way to turn on 2.4 & 5 GHz radios.

Is there another extra configuration needed or something related with the antenna?

Thanks in advance,

[Rasika Nayanajith · Accepted solution]

I have an outdoor AP 1572 connected to an AIR-ANT2513P4M-N= antenna.The access point is powered using POE that connects to a SB SG300 switch.

You can't  power this  AP model with a standard POE switch. It require UPoE , refer below if you use PoE in option.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/1570-DG/b_Aironet_AP1570_DG.html#concept_1EB631EB4BF74171AD6E1527E48C7F78

HTH

Rasika

*** Pls rate all useful responses ***

[csocorro1]

Hi Rasika, 

Thank you for your short response.

Yes, it seems that it is what is happening!

thanks again!