Cisco AP 2802i capwap enabled by default

[JAYESH RAMAIYA]

Hi

We need to purchase 2802i AP's which are enabled to capwap as soon as they are taken out of the box.

The company that I work with recently bought AP's that were 2802i with the model number AIR-2802i-E-K9 which we found to be ME by default. These had to be changed to run capwap so that we could access ths via the WLC. Is there a specific model that Cisco does for the 2802i that is capwap by default.

Thank you

[Rasika Nayanajith]

When ordering if you use "AIR-2802i-E-K9C" then by default it comes with ME image.

Anyway when you order these APs, you can choose what software version you need it to be loaded

HTH

Rasika

*** Pls rate all useful responses ***