ā06-04-2024 07:11 AM - edited ā06-04-2024 07:12 AM
Hi guys,
I have a new AP running 17.6.4.56. How can i downgrade the image to join my wlc that run 17.3.4c.
i tried to downgrade with this release 15.3.3-JPJ7c but i get this error.
Starting download AP image tftp://10.116.124.249/ap1g6a-k9w8-tar.153-3.JPJ7c.tar ...
It may take a few minutes. If longer, please abort command, check network and try again.
######################################################################## 100.0%
Image download completed.
Upgrading ...
status 'upgrade.sh: Script called with args:[NO_UPGRADE]'
do NO_UPGRADE, part1 is active part
status 'upgrade.sh: Script called with args:[-c PREDOWNLOAD]'
do PREDOWNLOAD, part1 is active part
status 'upgrade.sh: Start doing upgrade arg1=PREDOWNLOAD arg2=,from_cli arg3= ...'
status 'upgrade.sh: Using image /tmp/cli_part.tar on axel-qca ...'
status 'upgrade.sh: BLE device type 2, AP type AP_9130AXI'
status 'upgrade.sh: Doing AP image checks for software compatibility ...'
status 'upgrade.sh: This image does not support this AP product or model. Please use the recommended image and try again ...'
status 'upgrade.sh: Cleanup for do_upgrade...'
status 'upgrade.sh: /tmp/upgrade_in_progress cleaned'
status 'upgrade.sh: Cleanup tmp files ...'
Failed to update flash
Image transfer failed
any help.
ā06-04-2024 10:36 AM
>.... How can i downgrade the image to join my wlc that run 17.3.4c.
- Ref : https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
The first supported release for that model is 17.3.6 , if the AP has a later HW revision then VID 02
M.
ā06-04-2024 05:00 PM
@elouadoudi-otmane wrote:
status 'upgrade.sh: This image does not support this AP product or model.
Options are:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide