Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
how to enable dhcp nd add static route in Air cap37021-b-k9 this access point of cisco
Resolved! Cisco C9800 Upgrade
Which one should i download to upgrade my C9800 IOS? There is no Wireless LAN Controller software like for 5500 series
Will capwap disconnection will happen due to latency ?What will min and max latency for capwap connection?
Resolved! C9800 No discovery response
8Currently i have 2 WLC 2504 series with below detail :10.103.255.135 VDC-WLC-0210.103.255.5 VDC-WLC Both controller can be discovered by DHCP Option and DNS Then i purchase a new WLC 9800 series and this AP Mgmt Interface set to 10.103.200.5 and a...
Well we are a few years tardy.. Never have any particular use for the CIMC in the past.. We are now behind the curve, and the ucs-c220m4-huu-3.0.4r.iso imaged and booted from a thumb, fails with error 906 after boot and the update routine is copying...
Dear All,we have P2P blocking enabled on our Identity-PSK based SSID on our C9800 running Rel. 17.12.4 but now there is the need for some wifi clients to see each other while the clients still should be P2P blocked. There is a new feature called "P2P...
can we pre-download ap service pack to the ap's , i dont think so.i am upgrading my regional controllers in Dc1 and Dc2 , currently my ap's are on backup wlc running 17.12.4 and the primary also running 17.12.4 . now i need to install ap service pa...
I got cople of APs I configured them with static IP add, they are joined to the WLC fine but they got DHCP IP add, is there any idea to fix ? thanks
Hi Guys, I have recentley configured office extend while using 9130's and that all went well via 9800 wlcs. I have tried to configure a 1815T to try and enable rlan. I have went through this guide and i can get the green rlan tick on the interfaces C...
Yes, I understand, the hardware is retired and not supported. I'm trying to understand however, why this device is virtually erased. Lots of products get retired, but the old firmware is still there, maybe archived, but accessible. There are still ...
Dear Cisco Support Team,We have recently purchased a Cisco Access Point, model C9115AXI-D, with the following details:Serial Number: FVT2904L6WFMAC Address: 2CE3.8E6E.E7F8We are currently unable to configure the device due to a version-related issue....
Does someone know how to generate or import a simple self-signed cert?Tried to generate, but WLC generates a cert with CA Flag set. Import is not possible, because WLC doesn´t acceppt pkcs12 old an new encryption.
Hi All, I'm just newbie on cisco Wireless. We have guest users that can't connect to our guest wifi using the UN and PW we provided and when they login it was loading only. After some doing research I found this I set go to our WLC and set the NAC se...
Hello!I’m facing the following issue:Recently, I noticed that the Cisco EWC gigabit interface on a C9130 access point is negotiating at only 1000 Mbps. This surprised me because I’m certain it was running at 5000 Mbps when I initially connected it to...
Hi all; When configuring interfaces and their roles in C9800, how can I force the WLC to do not use SP for only OOB purpose and WMI for wireless user traffic servicing? In other words, how WLC forces to not use its SP for AAA negotiation with RADIUS ...
