Cisco IPSec Client Setup for Wireless

[mohankumarm]

I would like to set up Cisco IPSec VPN Client on a wireless Laptop to authenticate to a Cisco Radius Server 3.2. (WLC 4100)with pre-share keys.

I have setup the basic parameters on the WLC,SSID, VLAN, L3 Security IPSec and default IPSec parameters. The WLC does not seem to send/forward any kind of request to ACS at all and when i connect on the Wireless Client it behaves as a pass through VPN.

Thank you,

[amritpatek]

Try these links:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a008014a37c.shtml

http://www.cisco.com/warp/public/480/acs-peap.html

http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_administration_guide_chapter09186a008015cfd8.html