Cisco Prime Infrastructure 1.2

[elodie.lu]

Hello,

I have some maps of our building in PDF format and i want to load them on the cisco prime infrastructure 1.2, could you tell me how?

FYI: i opened : Design tab => Site maps Design but after this i don't know if i have to create a group or no;

Thanks

[Scott Fella]

Here is the guide. When you add a floor to a campus, there is browse button in which you choose the floor plan to upload.

Step 1 Save your floor plan maps in .PNG, .JPG, ,JPEG, or .GIF format.


http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/maps.html

Sent from Cisco Technical Support iPhone App

[elodie.lu]

Thanks, i done it.

I have a problem to fill out some information in the New Floor Area tab:

our building has 1 basement and a ground floor and 3 floors, may I consider the ground floor as a the first floor because i have to fill out Number of floors on the edit building tab then i have to put 4 floors otherwise in the new floor area i'll have only 3 floors on the drop down list. (and the last floor will not has an id floor)

and the problem is

ground floor has floor id 1

1st floor has floor id 2 ......

have you any suggestion?

[Scott Fella · Accepted solution]

You can or you can use 2 basements and 3 floors so you can have the ground as a basement and then your 1st-3rd floors will match up.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[elodie.lu]

could you tell me where i found this ? the "ansewered" option

[Scott Fella]

What do you mean?

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[elodie.lu]

if i want to put my my question as "solved" to help out other

[Scott Fella]

Ah... I think you rate the post and then you can mark it as correct.  Its been a while and I don't remember:)  Here is a link

https://supportforums.cisco.com/community/help#discussions_correct

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"