cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
439
Views
0
Helpful
1
Replies

Cisco Standalone AP configuration

Prasan Venky
Level 3
Level 3

Hi All,

Ap 1600 radios are automatically disabled if i configure WEP for Shared authentication.What can be the issue..?

1 Reply 1

Rasika Nayanajith
VIP Alumni
VIP Alumni

See whether your configurations is done correctly. Below documents may helps you

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080c1e263.shtml

As you know this is not a good security mechanism & you should not configure it unless client only supporting  WEP

HTH

Rasika

**** Pls rate all useful responses ****

Review Cisco Networking for a $25 gift card