cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1096
Views
0
Helpful
4
Replies

Cisco UX AP is not Primed through AirProvision Apps

rasel0001
Level 1
Level 1

I am from Bangladesh,I'm trying  to manually prime a lwapp on a 2504 controller,but it does not work at all,i can log in to my access point by using Cisco Airprovision apps,but after login "Regulatory Domain for this Universal AP are not available,This AP can not be configured" this message is shown by AirProvision Apps,i am very much tired to configure this.

Is regulatory Domain different for Bangladesh?

Any thoughts are appreciated.

Thanks

4 Replies 4

Rasika Nayanajith
VIP Alumni
VIP Alumni

Reach Cisco TAC & confirm this.

Below document does not list any regulatory domain for your country

http://www.cisco.com/c/en/us/products/collateral/wireless/access-points/product_data_sheet0900aecd80537b6a.html

HTH

Rasika

Yap,i have already seen that list,there are no regulatory domain for my country.

can you please tell me what should i do now?

mohanak
Cisco Employee
Cisco Employee

If you don't have Bangladesh listed then you must choose some other country, right?
Depending on that country you select on the WLC you can select the AP regulatory domain.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/AP_Regulatory_Domain_DG/b_universal_AP_regulatory_domain_DG.html#concept_A9024C74BAE24ED0BD42F3E94208C56F

http://www.cisco.com/c/en/us/products/collateral/wireless/access-points/product_data_sheet0900aecd80537b6a.html.

You can reach out to TAC team.

I have already tired through this document ,what ever country i select ap join in UX,Bnagladesh is under EMEA,but  in this list "http://www.cisco.com/c/en/us/products/collateral/wireless/access-points/product_data_sheet0900aecd80537b6a.html" there is no Regulatory domain for Bangladesh,that's why i select India,but it doesn't work.

Review Cisco Networking for a $25 gift card