Hey Community! I'm excited to share something we've been working on that I think will really resonate with many of you managing wireless networks today. We just released the Cisco State of Wireless Report 2026, based on insights from over 6,000 wirel...
Forum Posts
Resolved! QoS per SSID using anchor controller
I have a customer with two SSIDs being tunneled to an anchor controller. One SSID is guest and the other is contractors. The customer would like to rate-limit traffic from the anchor controller to the foreign controllers only for the guest SSID. Ther...
Resolved! question on WLC 2504 HA N+1?
in this HA N+1 guide for 2504 https://rscciew.wordpress.com/2014/06/07/n1-high-availability-configuration-on-cisco-2504wlc/ in one of the steps he mention going to the Controller > MobilityManagement > Mobility Groups and entering the details of...
Hello Experts. I'm working with two 1131AG Aironet APs Autonomus, right now I have just one SSID with WPA2-PSK authentication method and everything is working fine, but my client asked for add mac filtering authentication, I'm not sure if this AP can...
Hello Guys Client is unable to join wireless network , below is the debug from WLC y management suite, enabling Authentication*apfMsConnTask_5: Oct 31 12:35:09.912: c4:85:08:6e:1f:9a RSN Capabilities: 60*apfMsConnTask_5: Oct 31 12:35:09.912: c4:...
Can anyone speak about their experience with IP CCTV cameras, and how well they function across a wireless PTMP bridge network? I have been asked about the feasibility of running several security cameras back to the main network via wireless bridg...
See the picture below. Once and hour, all 20 of my phones will do this. It lasts about 10 seconds. From time to time it will also say initializing network. Please help!
I want to download ME images for 2800i AP. This is for one of our client. As a vendor i don't have the access to download it and the customer has not purchased the support. Please someone help me with this.
hi all, I have a problem I have AP 1602i joined to WISM2 controller with IOS version 7.4.121 when client try to connect on the SSID, he receive a log "authentication failed" when I tried to rejoin the AP to other controller it work normally and when ...
We need to give access to network by means of 38 x AIR-CAP3702P-E-K9 to less or more 1.500 users. It is reasonable ? How many concurrent users we can aspect one single AIR-CAP3702P-E-K9 can cover ? User should use a simple custom app on their smartp...
All I have 2 Cisco 2504 model: AIR-CT2504-K9, Both currently running AIR-CT2500-K9-8-0-121-0.aes. My APs are model AIR-CAP1702I-A-K9. I need to upgrade to AIR-CT2500-K9-8-0-152-0.aes on My 2504s due to the WPA2 issue and I cannot add any new APs du...
Hi all, Somebody knows if its possible to configure 1815W LAN ports (LAN1 to LAN3) in a Mobility Express deployment? Regards,
Hi I have upgraded a Wireless Controller from version 7.4.114.0 to version 8.0.140.0 and some of the APs don't register afterwards. 10 1142N APs have upgraded and registered without problems but the last one won't register. It just keeps rebooting....
Hi, I have a air-cap-2702I-A-K9, the 2.4ghz radio is enabled and functioning well but I can't enable the 5ghz radio in the GUI. This ap has been converted to Autonomous mode. I was reading about priming the ap but it only applied to UX models. Any ...
Resolved! Port channel Numbers
Hello, I am setting up port channels for the first time in a new network. I am using a cisco WS-C3850-24S switch to uplink our IDF's which are 2960x switches. My question is if IDF 1 is uplinked on the 3850 on port 5 and the channel port group on...
Dears, I purchased 4G LTE module and I want to use it with Cisco Router 4351. When I Install the module inside the Router and power on the device, Cisco Router doen not sense the module and no interfaces appears. is there any difference between ISR G...
