08-01-2012 11:45 AM - edited 07-03-2021 10:29 PM
Hi,
I have a Cisco WLan 2504 controller which after a reboot has lost network connectivity, when I connect via console it is stuck on loading image, Please help as I am not knowledgeable with Cisco stuff and only bought this as it has web interface.
Hasin
Solved! Go to Solution.
08-01-2012 02:44 PM
Contact Cisco TAC and get the WLC RMA-ed.
08-01-2012 02:44 PM
Contact Cisco TAC and get the WLC RMA-ed.
08-02-2012 02:08 AM
Thanks, But the device was working fine, it still fires up seems like OS image has becomen corrupt can I not just restore it? I have the image file downloaded can I not just copy to compact flash?
Hasin
08-02-2012 06:21 AM
Hasin did you try to reboot couple of times. Is it still stuck on the same screen.
08-02-2012 04:48 PM
Thanks, But the device was working fine, it still fires up seems like OS image
Device might be fine but the CF isn't.
08-05-2012 12:25 PM
Hi
below is where it stuck on, Please help.
50%
51%
52%
53%
54%
55%
56%
57%
58%
59%
60%
61%
62%
63%
64%
65%
66%
67%
68%
69%
70%
71%
72%
73%
74%
75%
76%
77%
78%
79%
80%
81%
82%
83%
84%
85%
86%
87%
88%
89%
90%
91%
92%
93%
94%
95%
96%
97%
98%
99%
100%
31535298 bytes read
Launching...
Launching images...
08-05-2012 12:38 PM
Nothing we can do to help you with this. You need to open a TAC case and they will either walk you thought the image upload or they will RMA the wlc.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide