Cisco WLC 2500 test AAA Radius

[lazuardinurfaiz15]

Hi all.

I am using Cisco WLC 2500 running firmware 8.0.115.0. I am trying to verify aaa connection to a radius server from WLC CLI. The command I found is this:

(Cisco Controller) > test aaa radius username <user name> password <password> wlan-id <wlan-id> ap-group <apgroup-name> server-index <server-index>

But that command is not available on my WLC. Is there any command to accomplish this? Thank you

[marce1000 · Accepted solution]

 Seems you need at least 8.2 or above :

          https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/212473-verify-radius-server-connectivity-with-t.html#anc2

 M.

[lazuardinurfaiz15]

Thank you Marcee for the answer