Cisco WLC Configure for Wireless IPv6 Client Support

Rps-Cheers · ‎12-29-2020

HI All,

Thesedays,we need deployment ipv6 in wireless network, but it's not clearly about cisco documents as below:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/IPV6_DG.html#pgfId-76850
So, i ask whether somebody has the example or guide about deployment ipv6 client support . Whether share it to me ?

Thx

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

marce1000 · ‎12-29-2020

- Consider the complete document to start with.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rps-Cheers · ‎12-29-2020

HI marce1000

There seems to be no hyperlink

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

marce1000 · ‎12-29-2020

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/IPV6_DG.html

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rps-Cheers · ‎12-31-2020

thank you for your reply. I have read this document before, I only have to try it, I don't know if it will succeed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

patoberli · ‎01-04-2021

IPv6 for clients should work fine today, if that is the only requirement. Just make sure it's enabled correctly on the WLC.