Dear all,
While setting a POC with a CMX10.2 and 3702AP+HALO Module, connected to 8.2.100 WLC, we encounter a problem...
AOA packets are not received by CMX, thus no hyperlocation active. After debbuging, it seems that the configuration is OK, but what i can see is
- On the AP
show capwap client rcb
Current Tx Power Level-5G : 1
Current Channel : 140
Nexthop MAC Address : 0050.56bf.014a à WLC Mac Address
HYPERLOCATION ADMIN STATE : 1
WLC GATEWAY MAC : 00:0D:B4:0D:F3:32 -> ,Firewall Mac Address
WLC HYPERLOCATION SRC PORT : 9999
BLE Module State : ENABLED
MSE IP[0] : 192.168.0.221
MSE PORT[0] : 2003
All the AOA traffic (port 2003) is sent to the default gateway MacAdress, with the CMX IP Address. Of course the firewall does not handle this traffic.
I Can not get why this traffic is sent to the firewall (which is the WLC default gateway) instead of beeing sent to the CMX , which is on the same lan/subnet.
Has anyone seen this configuration ?
Thanks a lot
