02-28-2022 06:00 PM
Good night, I would like to know how to access the Meraki MR20 router configuration.
Thanks.
02-28-2022 06:11 PM - edited 02-28-2022 06:17 PM
Power AP with adapter, connect a cable to AP lan port, set your laptop to obtain IP with dhcp and connect to AP. Browse to ap.meraki.com or whatever gateway you are assigned by the AP. If prompted login with your MR serial number.
if your device is connected to internet, then claim in on meraki dashboard and start configuring from there.
https://documentation.meraki.com/Getting_Started#Creating_a_Dashboard_Account
There is a very active meraki community, going forward you can post there.
02-28-2022 07:53 PM - edited 02-28-2022 07:53 PM
Note that this is an access point and not a router.
This is the quick start guide.
03-01-2022 12:08 AM
Not sure your environment, if the MR20 get IP address from DHCP, and it has an Internet connection then you can configure via Meraki dashboard
10-18-2023 12:39 PM
hi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide