Configure Cisco SAP702I access point to work with 2500 series Wireless Controller
I need help configuring a Cisco SAP702I access point to work with 2500 series Wireless Controller. At the minute the controller will not even detect the AP although they are on the same subnet. I have read in cisco documentation that the access point should do an IP broadcast to detect any controllers
I have not deployed the new 700 series Cisco AP's, but it is my understanding that the SAP702i is the standalone version made for autonomous deployments. CAP702i is made for controller based deployments. You'll need to get either the CAP702i AP's, or flash the AP's to make them lightweight. You will also need to make sure you have 7.5 code running on your 2500 WLC.
Listen: https://smarturl.it/CCRS8E33 Follow us: https://twitter.com/ciscochampion The goal for stadium and large venue Wi-Fi is to deliver an exceptional, fast, and reliable wireless experiences to tens of thousands of fan...
We are pleased to announce the immediate availability of the IOS-XE release 17.6.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link:
This version now introduces experimental new feature, "Upgrade Advisor, targeted to one of common case generators: what are the supported versions and how to upgrade my current controllers and APs
It supports both AireOS and IOS-XE, covering since ...
Thank you for the overwhelming response to the First and Second EFT refresh of 8.10MR6!
We are excited to announce the third refresh of 8.10 MR6 EFT Program for PRODUCTION deployments.
While the CCO release of 8.10MR6 is just a few we...
Greetings!Thank you for the overwhelming response and feedback for the first 17.3.4 EFT/Beta release.
Now we are excited to announce the second refresh of 17.3.4 EFT/Beta Program for PRODUCTION deployments.
This release is the s...