Configuring The Point

[mrashby]

All,

I have a 1242AG using ver 12.3(8)JA2. I want to configure the access point to use

1.WPA

2.EAP-TLS for authentication

3.TKIP for airlink encryption

The problem I am having is after I configure the SSID and authentication I can't seem to get the rest configured. In this implemention do I have to have a RADIUS server and if so can the AP act as the RADIUS server? Any help would be appreciated, thanks.

[dsweeny]

We need a radius server on to configure EAP-TLS.We will have to configure radius-server externally.Refer URL

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a008068d45a.shtml