Connect to wlan - wlan limited - after 3 minutes I get an ip address?

[Paul113331]

Hello community,

Sadly the vWlc does not stop to hurt me!

Firmware: 8.0.110.0
APs in FlexConnect mode.

I have configured one wlan. No wlan password. I gave this wlan the interface with the name "officeVlan10".

The settings for the interface are as follow:

Vlan Identifier 10

Primary IP address: 172.19.19.3

Netmask: 255.255.255.0

Gateway: 172.19.19.1

Primary DHCP Server 172.19.19.55

nothing else.

Only to mention: When i connect a pc on my switch where Vlan10 is configured I get immediately an Ip-Address of my dhcp server.

When I connect to the wlan, it takes very long to connect. After that my wlan connectivity is limited. Then I have to wait about 3 minutes, after that I get an IP-Address of my DHCP Server and the wlan is working as it should. I have a perfect wlan signal.

Can anybody help me, why I get so late an Ip-Address of my dhcp server?

Thank you again

[Saurav Lodh · Accepted solution]

refer

https://supportforums.cisco.com/discussion/12344721/vwlc-and-dhcp-problem

[Paul113331]

Thank you

Only DHCP Proxy was the solution. That was easy. And I was playing around with DHCP option 82 and ip helper x)