connecting ava robotics via wireless

[aftaleb]

Hi

we are connecting Ava rebot via wifi, after sometime it lost connection to DNS server.

We have good wireless signal but on Ava rebot it show weak signal, due to this we continuously loss connection to DNS.

There is any special configure we have  done on wireless controller.

[Leo Laohoo]

Ava robot has an Android-based tablet for control?

[aftaleb]

No it hasn't

[Mikey Boy]

Is broadcast forwarding enabled on the WLC? Some of these devices will not function correctly without it enabled.

Regards

[aftaleb]

Do you mean broadcast of SSID ?

[Mikey Boy]

No, if you go to Controller -> Broadcast forwarding || it is a drop down list of enable or disabled. 

Or from the cli "config network broadcast {enable | disable} " 

The setting will apply to all APs and SSIDs so you should be aware of any potential side effects of it. 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_01111.html