controller 2112

[jeanjborrull]

hi

my controller is a 2112 with firmware version 7.0.164

I have a wcs server installed on a Windows 2003 version is 7.0.220

my problem

I have a configuration for the week of 5:00 p.m. to 11:00 p.m.

. This configuration work-

On configuration the WLAN

      -I turn the signal to 5.00 PM

     - I turn off the signal at 11.00 PM

I would like a setup for the weekend who works 12 hours Saturday to Sunday 23 hours

how I can do that

thank you

[Amjad Abdullah]

Jean:

Where is your configuration please? What template that you use?

There is no WLC firmware 7.0.164. There is WCS 7.0.164 and I don't think it is compatible wiht WLC code 7.0.220.0.
Verify both WLC and WCS versions and let us know.

Thanks.

Amjad

[Scott Fella]

Just to add... WCS/NCS/MSE should either be on equivalent firmware versions or higher (newer) than the WLC firmware version.

If you search the forum, what others have done is to create a WLAN template, one that disables and another that enables the WLAN. Then you can setup the template to run on a schedule. So you would have different templates for the weekdays and for the weekend.

Sent from Cisco Technical Support iPhone App