- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-22-2015 11:52 AM - edited 07-05-2021 02:46 AM
Hi
Im about to set up a converged access solution with WLC 5760 as MC and several 3850 as MA. It is not clear to me what needs to be configured on the MC and what needs to be configured on the MA´s.
I know that each MA has to be configured with the WLAN configuration , but what about things like security profile, acl ,radius ? Anyone has a good documentation explaining this ?
Solved! Go to Solution.
- Labels:
-
Other Wireless Topics
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-22-2015 12:34 PM
Hi
Below should help you to start with basic peering between MA & MC
http://mrncciew.com/2013/12/14/3850ma-with-5760mc/
WLAN configuration to be done on MA
http://mrncciew.com/2013/12/04/wlan-config-in-3850-part-1/
http://mrncciew.com/2013/12/06/wlan-config-with-3850-part-2/
Below post should also helps you on 5760/3850 basic configs
http://mrncciew.com/2013/12/12/getting-started-with-5760/
http://mrncciew.com/2013/09/29/getting-started-with-3850/
http://mrncciew.com/2013/12/16/configuring-radius-on-5760/
Also this thread listed some useful documentation about CA.
https://supportforums.cisco.com/discussion/11984726/converged-access-design-information
HTH
Rasika
**** Pls rate all useful responses ***
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-22-2015 12:34 PM
Hi
Below should help you to start with basic peering between MA & MC
http://mrncciew.com/2013/12/14/3850ma-with-5760mc/
WLAN configuration to be done on MA
http://mrncciew.com/2013/12/04/wlan-config-in-3850-part-1/
http://mrncciew.com/2013/12/06/wlan-config-with-3850-part-2/
Below post should also helps you on 5760/3850 basic configs
http://mrncciew.com/2013/12/12/getting-started-with-5760/
http://mrncciew.com/2013/09/29/getting-started-with-3850/
http://mrncciew.com/2013/12/16/configuring-radius-on-5760/
Also this thread listed some useful documentation about CA.
https://supportforums.cisco.com/discussion/11984726/converged-access-design-information
HTH
Rasika
**** Pls rate all useful responses ***
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-24-2015 12:56 AM
Thank for great documentation :) !!
